← All parts
RELAY GEN PURPOSE 4PDT 2A 12V
RELAY GEN PURPOSE 4PDT 2A 12V
relay
This is a general-purpose relay with 4 poles and double throw (4PDT) configuration, rated for 2A at 12V DC. It supports single-side stable and 2-coil latching operation modes.
In stock
Specifications
24- Operating Voltage
- DC 1.5, 3, 5, 6, 9, 12, 24, 48 V
- Contact Arrangement
- 1 Form C, 2 Form C, 4 Form C
- Nominal Switching Capacity Resistive Load
- 2 A
- Max Switching Power Resistive Load
- 60 W, 125 VA
- Max Switching Voltage
- 220 V DC, 250 V AC
- Max Carrying Current
- 3 A
- Initial Contact Resistance Max
- 50 mΩ (By voltage drop 6 V DC 1A)
- Contact Material
- Ag+Au clad
- Nominal Operating Power Single Side Stable M Type
- 400 mW
- Nominal Operating Power Latching M Type
- 360 mW
- Nominal Operating Power Single Side Stable S Type
- 200 mW
- Nominal Operating Power Latching S Type
- 180 mW
- Insulation Resistance Initial
- Min. 100MΩ (at 500V DC)
- Initial Breakdown Voltage Between Open Contacts
- 1,000 Vrms for 1min. (500 Vrms for 1min: 1 Form C high sensitivity type)
- Initial Breakdown Voltage Between Contact And Coil
- 1,500 Vrms for 1min. (1,000 Vrms for 1min: 1 Form C high sensitivity type)
- Temperature Rise Max
- 65°C
- Operate Time Set Time
- Max. 10 ms [10 ms] (Nominal voltage applied to the coil, excluding contact bounce time.)
- Release Time Reset Time
- Max. 5 ms [10 ms] (Nominal voltage applied to the coil, excluding contact bounce time.)
- Mechanical Characteristics Shock Resistance Functional
- Min. 490 m/s2
- Mechanical Characteristics Vibration Resistance Functional
- 10 to 55 Hz at double amplitude of 3.3 mm (Detection time: 10µs.)
- Mechanical Characteristics Life Min
- Min. 108 (107: 1 Form C latching type) (at 600 cpm)
- Electrical Characteristics Life Min
- 5×10^5 rated load (at 60 cpm)
- Operating Temperature Range
- -40°C to +70°C –40°F to +158°F
- Humidity Range
- 5 to 85% R.H. (Not freezing and condensing at low temperature)
Pinout
14Low source legibility.The original manufacturer datasheet for this part was difficult to read, so this pinout may be incomplete or imperfect. Always confirm against the specific manufacturer’s datasheet before wiring.
| Pin | Name | Functions | Notes |
|---|---|---|---|
| 1 | COM1 | GPIO | Common terminal of the first pair |
| 2 | NO1 | GPIO | Normally open contact of the first pair |
| 3 | COM2 | GPIO | Common terminal of the second pair |
| 4 | NO2 | GPIO | Normally open contact of the second pair |
| 5 | COM3 | GPIO | Common terminal of the third pair |
| 6 | NO3 | GPIO | Normally open contact of the third pair |
| 7 | COM4 | GPIO | Common terminal of the fourth pair |
| 8 | NO4 | GPIO | Normally open contact of the fourth pair |
| 9 | NC1 | GPIO | Normally closed contact of the first pair |
| 10 | NC2 | GPIO | Normally closed contact of the second pair |
| 11 | NC3 | GPIO | Normally closed contact of the third pair |
| 12 | NC4 | GPIO | Normally closed contact of the fourth pair |
| 13 | S1 | GPIO | Set coil for 2-coil latching operation |
| 14 | R1 | GPIO | Reset coil for 2-coil latching operation |
Interactive pinout
Highlight:
RELAY GEN PURPOSE 4PDT 2A 12V
Click a pin to copy its name · tap a tag above to spotlight a bus.