← All parts
RF IC Modulator/Demodulator FM 300MHz 14-PDIP
RF IC Modulator/Demodulator FM 300MHz 14
ic
This RF IC is a modulator/demodulator for FM applications operating at 300MHz with balanced inputs and outputs.
In stock
Specifications
7- Operating Voltage
- VCC = 12 Vdc, VEE = -8.0 Vdc
- Supply Current
- ICC = 2.0 mAdc, IEE = 3.0 mAdc, PD = 33 mW
- Interface
- Single-ended and differential inputs/outputs
- Range
- Carrier input: 60 mVrms to 300 mVpp, Modulating signal: 1.0 kHz to 500 kHz
- Accuracy
- Common mode rejection: -85 dB typical
- Temperature Range
- TA = 0 to +70°C for MC1496, TA = -40 to +125°C for MC1496B
- Package
- PDIP-14
Pinout
14Low source legibility.The original manufacturer datasheet for this part was difficult to read, so this pinout may be incomplete or imperfect. Always confirm against the specific manufacturer’s datasheet before wiring.
| Pin | Name | Functions | Notes |
|---|---|---|---|
| 1 | Signal Input (Pin 1) | GPIO | Input signal port |
| 2 | Signal Input (Pin 2) | GPIO | Input signal port |
| 3 | Signal Input (Pin 3) | GPIO | Input signal port |
| 4 | Gain Adjust (Pin 4) | GPIO | Adjust gain and signal handling |
| 5 | Gain Adjust (Pin 5) | GPIO | Adjust gain and signal handling |
| 6 | Output (Pin 6) | GPIO | Balanced output port |
| 7 | Bias (Pin 7) | POWER | Bias voltage input |
| 8 | VEE (Pin 8) | GND | Negative supply voltage ground |
| 9 | N/C (Pin 9) | — | Not connected |
| 10 | Output (Pin 10) | GPIO | Balanced output port |
| 11 | Carrier Input (Pin 11) | GPIO | Carrier input signal port |
| 12 | N/C (Pin 12) | — | Not connected |
| 13 | N/C (Pin 13) | — | Not connected |
| 14 | Signal Input (Pin 14) | GPIO | Input signal port |
Interactive pinout
Highlight:
RF IC Modulator/Demodulator FM 300MHz 14
Click a pin to copy its name · tap a tag above to spotlight a bus.