← All parts
TLC272 Dual CMOS Op-Amp
TLC272
Texas Instrumentsic amplifier
The TLC272 is a precision dual operational amplifier with low input offset voltage and high input impedance, suitable for applications requiring precise amplification.
In stock
Specifications
8- Operating Voltage
- 3V to 16V
- Supply Current
- 1.12mA (at VDD = 5V, no load)
- Interface
- Analog
- Resolution
- Not applicable
- Range
- 0°C to 125°C (operating temperature)
- Accuracy
- Input offset voltage: 0.12mV to 3000µV
- Temperature Range
- -40°C to 125°C (storage and operating temperature)
- Package
- PDIP, SOIC, SOP, TSSOP
Pinout
8Low source legibility.The original manufacturer datasheet for this part was difficult to read, so this pinout may be incomplete or imperfect. Always confirm against the specific manufacturer’s datasheet before wiring.
| Pin | Name | Functions | Notes |
|---|---|---|---|
| 1 | IN- (Non-inverting Input) | GPIO | Input to the non-inverting terminal of the amplifier. |
| 2 | OUT (Output) | GPIO | The output signal from the amplifier. |
| 3 | IN+ (Inverting Input) | GPIO | Input to the inverting terminal of the amplifier. |
| 4 | V- (Negative Supply) | POWER | The negative supply voltage for the device. |
| 5 | V+ (Positive Supply) | POWER | The positive supply voltage for the device. |
| 6 | GND (Ground) | GND | Common ground reference point. |
| 7 | IN- (Non-inverting Input, 2nd Amplifier) | GPIO | Input to the non-inverting terminal of the second amplifier. |
| 8 | OUT (Output, 2nd Amplifier) | GPIO | The output signal from the second amplifier. |
Interactive pinout
Highlight:
TLC272
Click a pin to copy its name · tap a tag above to spotlight a bus.