← All parts
Can Bus Featherwing
AdafruitRP2040
A FeatherWing for CAN Bus communication with an MCP2515 controller and TJA1051/3 transceiver.
In stock
Specifications
6- Operating Voltage
- 3.3V to 5V (via charge pump) for Feather, 5V for CAN Bus transceiver.
- Logic Level
- 3.3V logic level for Feather, 5V tolerant for CAN Bus transceiver.
- Clock Speed
- Not specified
- Flash
- Not specified
- Ram
- Not specified
- Gpio Count
- 5 (RST, CS, INT, CANL, CANH)
Pinout
6| Pin | Name | Functions | Notes |
|---|---|---|---|
| CANL | CAN Low | SPI | Connected to the CAN low signal of the CAN Bus standard |
| CANH | CAN High | SPI | Connected to the CAN high signal of the CAN Bus standard |
| RST | Reset | GPIO | MCP2515 reset pin, can be connected to different IO pins via a jumper |
| CS | Chip Select | SPI | MCP2515 chip select pin, can be connected to different IO pins via a jumper |
| INT | Interrupt | GPIO | MCP2515 interrupt pin, can be connected to different IO pins via a jumper |
| SLNT | Silent Mode | GPIO | TJA1051/3 transceiver silent mode control |
Interactive pinout
Highlight:
RP2040
Click a pin to copy its name · tap a tag above to spotlight a bus.