← All parts
PA1010D Mini GPS
AdafruitN/A
The Adafruit PA1010D Mini GPS module is a compact GPS solution with I2C and UART interfaces, supporting multiple satellite systems and featuring an internal antenna for easy use.
In stock
Specifications
3- Operating Voltage
- 3-5VDC
- Logic Level
- 3.3V
- Dimensions
- 1" x 1" (~25mm x 25mm)
Pinout
9| Pin | Name | Functions | Notes |
|---|---|---|---|
| VIN | power_input | POWER | Connect to 3-5VDC. |
| GND | ground | GND | Power and signal ground. Connect to your power supply and microcontroller ground. |
| SDA | i2c_data | I2C | I2C data pin, connect to your microcontroller or computer's I2C data line. Has 10K pullups to Vin. |
| SCL | i2c_clock | I2C | I2C clock pin, connect to your microcontroller or computer's I2C clock line. Has 10K pullups to Vin. |
| TXO | uart_transmit | UART | Transmits data from the GPS module to your microcontroller or computer at 9600 baud, 8N1 by default. 3.3V logic level. |
| RXI | uart_receive | UART | Receives data to the GPS module from your microcontroller or computer at 9600 baud, 8N1 by default. Level shifted for 3-5V logic. |
| RST | reset | GPIO | When pulled to ground, this will put the chip in the module into reset. |
| PPS | pulse_per_second | — | Pulse per second output. Logic low (ground) most of the time and pulses high (3.3V) once a second for 50-100ms. |
| WAKE | wake | — | Works with low power and standby modes. Check the datasheet for more information. |
Interactive pinout
Highlight:
N/A
Click a pin to copy its name · tap a tag above to spotlight a bus.