← All parts
Qt Py Rp2040 Usb To Serial Midi Friends
AdafruitRP2040
A compact USB to Serial MIDI converter using the QT Py RP2040 dev board with MIDI friend breakouts for TRS-A, TRS-B, and DIN-5 connections.
In stock
Specifications
3- Operating Voltage
- 3.3V (from 3V header) or 5V (if using 30Ω resistor for power) [not explicitly stated] V
- Flash
- Not specified
- Ram
- Not specified
Pinout
4Low source legibility.The original manufacturer datasheet for this part was difficult to read, so this pinout may be incomplete or imperfect. Always confirm against the specific manufacturer’s datasheet before wiring.
| Pin | Name | Functions | Notes |
|---|---|---|---|
| TX | TX | UART | Connected to 10Ω resistor |
| RX | RX | UART | Not used in this configuration |
| 3V | 3V | POWER | Connected to 30Ω resistor for DIN-5 and TRS-A, TRS-B |
| GND | GND | GND | Connected to ground in all configurations |
Interactive pinout
Highlight:
RP2040
Click a pin to copy its name · tap a tag above to spotlight a bus.