← All parts
Raspberry Pi Pico W
Raspberry PiRP2040
The Raspberry Pi Pico W is a compact microcontroller board featuring the RP2040 chip with integrated 2.4GHz WiFi and Bluetooth 5.2 connectivity. It offers 26 multi-function GPIO pins, including three ADC inputs, and can be powered via Micro USB or external supplies.
In stock
Specifications
30- Cpu
- Dual-core Cortex-M0+
- Clock Speed
- 133 MHz
- Ram
- 264 KB
- Flash
- 2 MB
- Logic Level
- 3.3 V
- Operating Voltage Vsys Min
- 1.8 V
- Operating Voltage Vsys Max
- 5.5 V
- Operating Voltage Vbus
- 5 V
- Operating Temperature Min
- -20 °C
- Operating Temperature Max
- 70 °C
- Gpio Count
- 26
- Adc Gpio Count
- 3
- Adc Resolution
- 12 bit
- Adc Sample Rate
- 500 ksps
- Uart Count
- 2
- I2c Count
- 2
- Spi Count
- 2
- Pwm Channels
- 16
- Usb Type
- Micro USB B
- Usb Version
- 1.1
- Connectivity
- WiFi, Bluetooth
- Wifi Standard
- 802.11n
- Wifi Band
- 2.4 GHz
- Wifi Security
- WPA3
- Bluetooth Version
- 5.2
- Bluetooth Features
- LE Central and Peripheral roles, Classic
- Debug Interface
- SWD
- Dimensions
- 51mm × 21mm × 1mm
- Form Factor
- DIP, Surface-mount module
- Pin Pitch
- 2.54 mm
Pinout
43| Pin | Name | Functions | Notes |
|---|---|---|---|
| 1 | GP0 | GPIOUARTI2CSPIPWM | |
| 2 | GP1 | GPIOUARTI2CSPIPWM | |
| 3 | GND | GND | |
| 4 | GP2 | GPIOI2CSPIPWM | |
| 5 | GP3 | GPIOI2CSPIPWM | |
| 6 | GP4 | GPIOSPII2CUARTPWM | |
| 7 | GP5 | GPIOSPII2CUARTPWM | |
| 8 | GND | GND | |
| 9 | GP6 | GPIOSPII2CUARTPWM | |
| 10 | GP7 | GPIOSPII2CUARTPWM | |
| 11 | GP8 | GPIOSPII2CUARTPWM | |
| 12 | GP9 | GPIOSPII2CUARTPWM | |
| 13 | GND | GND | |
| 14 | GP10 | GPIOSPII2CUARTPWM | |
| 15 | GP11 | GPIOSPII2CUARTPWM | |
| 16 | GP12 | GPIOSPII2CUARTPWM | |
| 17 | GP13 | GPIOSPII2CUARTPWM | |
| 18 | GND | GND | |
| 19 | GP14 | GPIOSPII2CUARTPWM | |
| 20 | GP15 | GPIOSPII2CUARTPWM | |
| 21 | GP16 | GPIOUARTI2CSPIPWM | |
| 22 | GP17 | GPIOUARTI2CSPIPWM | |
| 23 | GND | GND | |
| 24 | GP18 | GPIOUARTI2CSPIPWM | |
| 25 | GP19 | GPIOUARTI2CSPIPWM | |
| 26 | GP20 | GPIOUARTI2CSPIPWM | |
| 27 | GP21 | GPIOUARTI2CSPIPWM | |
| 28 | GND | GND | |
| 29 | GP22 | GPIOUARTI2CSPIPWM | |
| 30 | RUN | GPIO | RP2040 enable pin, short low to reset. |
| 31 | GP26 / ADC0 | GPIOADC | ADC capable. Input voltage must not exceed 3.3V + 300mV. |
| 32 | GP27 / ADC1 | GPIOADC | ADC capable. Input voltage must not exceed 3.3V + 300mV. |
| 33 | AGND | GND | Analog ground for ADC pins. |
| 34 | GP28 / ADC2 | GPIOADC | ADC capable. Input voltage must not exceed 3.3V + 300mV. |
| 35 | ADC_VREF | POWER | ADC power supply and reference voltage. |
| 36 | 3V3 | POWER | Main 3.3V supply, max 300mA for external circuitry. |
| 37 | 3V3_EN | POWER | Enable pin for 3.3V SMPS, pulled high to VSYS. Short low to disable 3.3V. |
| 38 | GND | GND | |
| 39 | VSYS | POWER | Main system input voltage (1.8V to 5.5V). |
| 40 | VBUS | POWER | Micro-USB input voltage (nominally 5V). |
| — | SWCLK | GPIO | Serial Wire Debug Clock. Internal 60kΩ pull-up. |
| — | GND | GND | Ground for SWD port. |
| — | SWDIO | GPIO | Serial Wire Debug Data. Internal 60kΩ pull-up. |
Interactive pinout
Highlight:
RP2040
Click a pin to copy its name · tap a tag above to spotlight a bus.