ic

Communication ICs - Various Tone Decoder

The LM567 Tone Decoder is a general-purpose IC designed to detect input signals within a specified frequency range and provide an output when the signal matches the center frequency.

CONN IC DIP SOCKET 8POS TIN

Series 830 and 832 spring-loaded connectors provide a conductive path for through-hole and surface-mount applications, featuring flat or concave face contact surfaces.

Differential Voltage Comparator

The LM161/LM361 is a high-speed differential voltage comparator with complementary TTL outputs. It's designed for applications requiring fast switching and low input offset voltage.

Dual 30V 700-kHz Operational Amplifier

The datasheet describes a dual operational amplifier with two independent amplifiers, each capable of operating up to 700 kHz and powered by supply voltages up to 30V.

Dual Low Power JFET Input Operational Am

The LF442-MIL is a dual low power JFET input operational amplifier with improved DC characteristics compared to LM1458 while maintaining similar AC performance. It draws one-tenth the supply current and has very low input bias and offset currents, making it suitable for battery-powered applications.

Fast-Settling FET-Input Instrumentation

The INA110 is a FET-input instrumentation amplifier used for high-speed differential pulse amplification and data acquisition, featuring low bias current and fast settling time.

FET-Input, Low Power Instrumentation Amp

The INA121 is a low-power FET-input instrumentation amplifier designed for high-impedance applications with excellent accuracy and wide supply range.

Flip Flop 2 Element D-Type 1 Bit Positiv

A dual D-type flip-flop with positive edge triggering for data and memory hold functions.

General Purpose Amplifier 8-PDIP

The LM107 series is a general-purpose operational amplifier with low input currents and temperature stability. It's suitable for applications requiring high accuracy, low noise, and long-term reliability.

High Common-Mode Voltage Difference Ampl

The INA117 is a high common-mode voltage difference amplifier with a wide input range and low nonlinearity, suitable for industrial applications requiring precise measurement of small differential voltages in the presence of large common-mode signals.

High slew rate operational amplifier

The NE/SE531 is a high-slew-rate operational amplifier designed for applications requiring fast settling and large-signal bandwidths. It features a single capacitor compensation, making it suitable for various instrumentation uses.

High-Voltage, High-Current Darlington Tr

High-Voltage, High-Current Darlington Transistor Arrays are used for relay drivers and motor control applications, featuring seven NPN Darlington pairs with high-voltage outputs.

IC ADC 10BIT SAR 20CDIP

The ADC1001 is a 10-bit successive approximation A/D converter with differential inputs and operates over an input range of 0V to 5V.

IC ADC 12BIT SAR 16DIP

This is a 12-bit SAR ADC with 8 analog inputs and SPI interface for converting analog signals to digital.

IC ADC 8BIT SAR 20DIP

The ADC080x series is a 8-bit successive approximation analog-to-digital converter that interfaces with microprocessors and operates with a single 5V supply.

IC D-TYPE TRANSP SGL 8:8 20DIP

The 74HC573 is an octal D-type transparent latch with a 3-state output, designed for digital signal processing and interfacing.

IC DRIVER 4/0 14DIP

The SN75C188 is a quadruple low-power line driver designed for data terminal equipment interfacing with data communications equipment, compatible with ANSI EIA/TIA-232-E and ITU V.28 standards.

IC F/V & V/F CONV 100KHZ 14DIP

The VFC32 is a voltage-to-frequency converter that provides an output frequency proportional to its input voltage, with excellent linearity and noise immunity.

IC F/V & V/F CONV 1MHZ 14DIP

The VFC320 is a monolithic voltage-to-frequency and frequency-to-voltage converter with high linearity, designed for analog-to-digital conversion applications.

IC GATE NAND 2CH 2-INP 8-DIP

The CD40107B is a dual 2-input CMOS NAND buffer/driver with high-voltage capability, featuring open-drain outputs and wired-OR functionality.

IC INVERTER 6CH 1-INP 14MDIP

The 74F04 is a hex inverter IC containing six independent gates, each performing an invert function. It's available in various packages including SOIC and PDIP.

IC MCU 8BIT 14KB FLASH 28SPDIP

The PIC16F87XA is an 8-bit microcontroller with up to 8K Flash memory and various peripherals including timers, ADC, I2C, SPI, and UART.

IC MCU 8BIT 3.5KB FLASH 18DIP

A 8-bit microcontroller with 1.8k Flash, featuring various I/O and timers.

IC MCU 8BIT 8KB FLASH 20DIP

This is an 8-bit AVR microcontroller with 2/4/8KB of flash memory, featuring ADC, PWM, and various I/O ports. It operates in a wide voltage range and supports multiple power-saving modes.