ic

IC MULTIVIBRATOR 45NS 16DIP

The DM74LS123 is a dual retriggerable monostable multivibrator with clear and complementary outputs, capable of generating output pulses ranging from nanoseconds to extremely long durations.

IC OPAMP GP 1 CIRCUIT 14DIP

The LM741 is a general-purpose operational amplifier with an 8-pin package. It features inverting and non-inverting inputs, output, supply voltage pins, and offset nulls for precise gain control.

IC OPAMP GP 1 CIRCUIT TO220-7

The OPA452 is a high-voltage operational amplifier with wide supply range, high output current capability, and thermal protection features.

IC OSC SINGLE TIMER 100KHZ 8SO

This IC is an oscillator/single timer capable of producing accurate time delays or oscillation with adjustable duty cycle. It operates in astable or monostable modes.

IC RECEIVER 0/4 16DIP

The IC Receiver 0/4 is a quadruple differential line receiver designed for multipoint bus transmission in noisy environments, operating from a single 5V supply and meeting ANSI/EIA/TIA standards.

Instrumentation Amplifiers Precision Low

The INA118 is a low-power, general-purpose instrumentation amplifier with excellent accuracy and wide common-mode rejection.

Linear Voltage Regulator IC Negative Fix

The LM79XX series is a negative voltage regulator with fixed output voltages of -5V, -12V, and -15V, providing up to 1.5A current and featuring thermal protection.

LM1877 Dual Audio Power Amplifier

The LM1877 is a dual audio power amplifier designed for stereo phonographs and other audio systems, delivering up to 2W/channel into an 8Ω load.

Low Power Dual Operational Amplifiers

LMx58-N is a low-power dual operational amplifier designed for wide power supply ranges and single-supply operation, suitable for battery-powered applications.

Low Voltage Audio Power Amplifier

LM386 is a low voltage audio power amplifier designed for battery-operated applications, offering gains from 20 to 200 with ground-referenced inputs and self-centering output.

Monolithic Operational Amplifier

The LM709 is a monolithic operational amplifier designed for general-purpose applications. It features high gain and low offset voltage, suitable for various analog signal processing tasks.

Multiplexer Switch ICs 8Ch Analog

This IC is an 8-channel analog multiplexer/demultiplexer that switches between multiple analog signals based on digital control inputs.

NOR Gate IC 2 Channel 14-SO

The 74HC4002 is a dual 4-input NOR gate IC used for digital logic operations, providing high noise immunity and wide supply voltage range.

NPN Si AF DRIVER

NPN transistor used for audio amplification and driving applications.

operational amplifier; 20MHz; Ch: 1; TO5

The NTE937 is a high-speed, low-noise JFET input operational amplifier designed for precision applications.

Operational Amplifiers - Op Amps Dual Ge

This is a dual operational amplifier designed for general-purpose applications with wide supply voltage ranges and low offset voltages.

Peripheral Driver 2 Element 2 Bit per El

The SN5545xB is a dual-peripheral driver designed for high-current, high-speed switching applications. It supports AND, NAND, OR, and NOR logic inputs.

Precision G = 100, Instrumentation Ampli

INA131 is a precision G = 100 instrumentation amplifier with low offset voltage, drift, and high common-mode rejection.

Programmable Quad Operational Amplifiers

The LM146 and LM346 are programmable quad operational amplifiers that allow users to tailor gain, supply current, input bias current, and other characteristics through external resistors.

Quad Operational Amplifier

A quad operational amplifier designed for single or split power supply operation with wide voltage ranges and high gain.

quad two input NAND gate in 14 pin DIP p

This is a quad two input NAND gate IC with DIP14 package.

RF IC Modulator/Demodulator FM 300MHz 14

This RF IC is a modulator/demodulator for FM applications operating at 300MHz with balanced inputs and outputs.

Self-Calibrating 12-Bit Plus Sign mP-Com

ADC1241 is a self-calibrating 12-bit plus sign A/D converter with sample-and-hold, capable of minimizing zero and full-scale errors through auto-zero or auto-calibration routines.

SN75150 DUAL LINE DRIVER

The SN75150 is a dual line driver designed for data transmission systems and level translation, operating from ±12V supplies.