Voltage Regulator

LMR16030 · Texas Instruments

LMR16030 is a 60V, 3A buck converter with ultra-low quiescent current and adjustable switching frequency.

LMR33630 · Texas Instruments

The LMR33630 is a synchronous step-down DC/DC converter that delivers up to 3 A of load current from an input voltage range of 3.8 V to 36 V, with high efficiency and low quiescent current.

LP2950 · Texas Instruments

The LP2950 is a micropower low-dropout linear regulator supplying up to 100 mA from a 2 V to 30 V input. It features low quiescent current, tight output accuracy, and built-in current limiting and thermal shutdown.

LP2950 · Texas Instruments

The LP2950 is a low-dropout linear regulator that provides stable output voltages from an input supply and can be used in battery-powered systems.

LP2985 · Texas Instruments

The LP2985 is a low-noise, low-dropout LDO regulator with an output range of 1.2V to 5.0V and up to 150mA of load current.

LP38690 · Texas Instruments

The LP38690 is a low-dropout linear regulator that provides stable output voltage with wide input voltage range and low dropout voltage, suitable for various portable devices.

LP5907 · Texas Instruments

LP5907 is a low-noise LDO that can supply up to 250mA output current, designed for RF and analog circuits with features like low noise, high PSRR, and low quiescent current.

LP5912 · Texas Instruments

The LP5912 is a low-noise, low-IQ LDO that can supply up to 500mA of output current and provides stable regulated output voltage with low dropout voltage.

MC34063 · Texas Instruments

The MC34063 DC-DC converter is a switching regulator that can operate with an input voltage range of 3V to 40V and provide up to 1.5A output current, suitable for boost, buck, or inverting topologies.

MCP1700 · Microchip

The MCP1700 is a low quiescent current, low dropout voltage regulator. It provides stable output voltages from 1.2V to 5.0V with output current up to 250 mA, suitable for battery-powered devices.

MCP73831 · Microchip

The MCP73831 is a single-cell LiPo charger controller designed for managing and protecting lithium polymer batteries.

NCP1117 · onsemi

The NCP1117 is a 1A low-dropout positive voltage regulator available in fixed or adjustable output versions. It features internal protection like current limiting and thermal shutdown, and operates with inputs up to 20V.

TLV1117 · Texas Instruments

The TLV1117 is a linear voltage regulator that provides up to 800mA of output current with an input range from 2.7V to 15V and adjustable or fixed output voltages between 1.25V to 13.8V or 1.5V to 5V, respectively.

TP4056 · NanJing Top Power

The TP4056 is a linear constant-current/constant-voltage charger designed for single-cell lithium-ion batteries. It features thermal regulation, programmable charge current up to 1000mA, and two status outputs to indicate charging and charge termination.

TPS54231 · Texas Instruments

TPS54231 is a 28V, 2A buck converter with an integrated high-side MOSFET, designed for efficient power supply designs and featuring pulse skipping Eco-mode for light loads.

TPS5430 · Texas Instruments

The TPS5430 is a 3A buck regulator with an integrated high-side MOSFET, designed for wide input voltage ranges and adjustable output voltages down to 1.22V.

TPS54331 · Texas Instruments

The TPS54331 is a 28V, 3A buck regulator that integrates an 80mΩ high-side MOSFET for efficient power supply designs.

TPS563201 · Texas Instruments

TPS563201 is a 3A synchronous buck converter that efficiently regulates input voltage to output voltages between 0.76V and 7V, with features like D-CAP2 control scheme for fast transient response and pulse-skip mode for high efficiency at light loads.

TPS61023 · Texas Instruments

The TPS61023 is a synchronous boost converter that steps up input voltages from 0.5V to 5.5V to provide an output of 2.2V to 5.5V, with high efficiency and low quiescent current.

TPS61090 · Texas Instruments

TPS61090 is a synchronous boost converter designed to efficiently step up input voltage from 1.8V to 5.5V, with adjustable or fixed output voltages and capable of delivering up to 500mA.

TPS61200 · Texas Instruments

The TPS61200 is a boost converter designed for low input voltage applications, providing up to 600 mA output current with efficiencies over 90%.

TPS62160 · Texas Instruments

The TPS62160 is a synchronous buck converter with adjustable output voltage from 0.9V to 6V, supporting up to 1A of continuous current.

TPS62840 · Texas Instruments

The TPS62840 is a high-efficiency step-down converter designed for ultra-low operating quiescent current and RF-friendly operation.

TPS63060 · Texas Instruments

The TPS63060 is a high input voltage, buck-boost converter that can operate with an input range of 2.5V to 12V and provide up to 2A output current in buck mode or 1.3A in boost mode.