← All parts
SN754410 Motor Driver
SN754410
Texas Instrumentsic motor driver
The SN754410 is a quadruple half-H driver providing bidirectional drive currents up to 1 A at 4.5V to 36V. Drivers are enabled in pairs to form full-H bridges for driving DC motors, stepper motors, relays, and solenoids.
In stock
Specifications
8- Logic Supply Voltage
- 4.5 to 5.5 V
- Output Supply Voltage
- 4.5 to 36 V
- Output Current Continuous
- 1 A
- Peak Output Current
- 2 A
- Channels
- 4
- Interface
- TTL/CMOS logic inputs
- Operating Temperature Range
- -40 to 85 °C
- Package Types
- PDIP-16
Pinout
16| Pin | Name | Functions | Notes |
|---|---|---|---|
| 1 | 1,2EN | GPIO | Enable driver channels 1 and 2 (active high input) |
| 2 | 1A | GPIO | Driver 1 input, non-inverting |
| 3 | 1Y | GPIO | Driver 1 output |
| 4 | GROUND | GND | Device ground and heat sink pin |
| 5 | GROUND | GND | Device ground and heat sink pin |
| 6 | 2Y | GPIO | Driver 2 output |
| 7 | 2A | GPIO | Driver 2 input, non-inverting |
| 8 | VCC2 | POWER | Power VCC for drivers, 4.5 V to 36 V |
| 9 | 3,4EN | GPIO | Enable driver channels 3 and 4 (active high input) |
| 10 | 3A | GPIO | Driver 3 input, non-inverting |
| 11 | 3Y | GPIO | Driver 3 output |
| 12 | GROUND | GND | Device ground and heat sink pin |
| 13 | GROUND | GND | Device ground and heat sink pin |
| 14 | 4Y | GPIO | Driver 4 output |
| 15 | 4A | GPIO | Driver 4 input, non-inverting |
| 16 | VCC1 | POWER | 5 V supply for internal logic translation |
Interactive pinout
Highlight:
SN754410
Click a pin to copy its name · tap a tag above to spotlight a bus.