Motor Driver
17 Motor Driver chips — pinouts, specs, and datasheets.
DRV8214 · Texas Instruments
The DRV8214 is a high-performance brushed DC motor driver with ripple counting, stall detection, and speed regulation features.
DRV8302 · Texas Instruments
The DRV8302 is a three-phase gate driver for brushless motor control with integrated buck converter and current shunt amplifiers.
DRV8313 · Texas Instruments
The DRV8313 is a 3-phase motor driver IC designed for brushless DC motors and solenoids, providing up to 2.5-A peak current drive per channel.
DRV8316 · Texas Instruments
The DRV8316 is a three-phase motor driver designed for brushless DC motors, supporting up to 8-A peak current and featuring multiple PWM control interfaces.
DRV8424 · Texas Instruments
The DRV8424 is a stepper motor driver with integrated current sensing and microstepping capabilities, designed for industrial and consumer applications.
DRV8801 · Texas Instruments
The DRV8801 is a motor driver that provides full H-bridge functionality for brushed DC motors, with features like low RDS(on) MOSFETs, sleep mode, and various protection mechanisms.
DRV8825 · Texas Instruments
The DRV8825 is a microstepping bipolar stepper motor driver with two integrated H-bridges and a built-in indexer. A simple STEP/DIR interface and mode pins support full-step up to 1/32 microstepping, driving up to 2.5 A per coil.
DRV8833 · Texas Instruments
The DRV8833 is a dual H-bridge motor driver that runs two brushed DC motors or one bipolar stepper. A simple PWM interface controls direction and speed, with integrated current regulation and protection, delivering up to 1.5 A RMS per bridge.
DRV8834 · Texas Instruments
DRV8834 is a dual-bridge stepper driver that supports both phase/enable and indexer modes for controlling stepper motors or DC motors, with an operating voltage range of 2.5V to 10.8V.
DRV8841 · Texas Instruments
The DRV8841 is a dual H-bridge motor driver that can control two brushed DC motors or a bipolar stepper motor, featuring PWM control and configurable current levels.
DRV8870 · Texas Instruments
The DRV8870 is a brushed DC motor driver that can control the speed of a motor using PWM and features integrated current regulation, overcurrent protection, and thermal shutdown.
DRV8871 · Texas Instruments
DRV8871 is a brushed DC motor driver that controls H-bridge outputs with logic inputs and provides current regulation for motor operation.
DRV8874 · Texas Instruments
The DRV8874 is an H-bridge motor driver that supports brushed DC motors and other inductive loads with a supply voltage range of 4.5V to 37V.
DRV8876 · Texas Instruments
The DRV8876 is a high-voltage H-bridge motor driver with integrated current sensing and regulation, supporting brushed DC motors and other loads.
L293D · Texas Instruments
The L293D is a quadruple half-H driver that drives inductive loads such as relays, solenoids, and DC or bipolar stepper motors. It provides bidirectional currents up to 600 mA per channel at 4.5 to 36 V, with integrated flyback diodes.
LMD18200 · Texas Instruments
The LMD18200 is a 3A H-Bridge driver designed for motion control applications, capable of driving DC and stepper motors with up to 6A peak output current.
SN754410 · Texas Instruments
The SN754410 is a quadruple half-H driver providing bidirectional drive currents up to 1 A at 4.5V to 36V. Drivers are enabled in pairs to form full-H bridges for driving DC motors, stepper motors, relays, and solenoids.