Adafruit boards

Adafruit · M0/M4/RP2040/ESP32-S2/S3, nRF52840

A FeatherWing for RGB matrices with various pinouts depending on the Feather type.

Adafruit · Raspberry Pi 5

A board for creating RGB matrix displays using a Raspberry Pi 5 with Adafruit's RGB Matrix Bonnet or HAT.

Adafruit

RGB Matrix Plus Real Time Clock Hat for Raspberry Pi, supports 64x64 matrices with I2C RTC.

Adafruit · ItsyBitsy M0 Express

A guide on using a rotary encoder with CircuitPython for volume control and play/pause functionality.

Adafruit · RP2040

Adafruit RP2040 CAN Bus Feather, featuring an RP2040 microcontroller and MCP25625 CAN bus chipset.

Adafruit · RP2040

Adafruit Feather RP2040 ThinkInk is a development board with an RP2040 microcontroller, designed for e-paper displays and featuring multiple I/O capabilities.

Adafruit · RP2040

The Adafruit RP2040 Prop Maker Feather is a microcontroller board with an RP2040 chip running at 133 MHz, featuring extensive GPIO capabilities and onboard peripherals for audio, I/O, and battery management.

Adafruit

A breakout board for interfacing with RS-232 equipment, featuring UART to RS-232 level shifting.

Adafruit

A low-power wake-up timer breakout board with I2C interface, used for time-keeping and alarms.

Adafruit

A breakout board for the Texas Instruments DRV5032 Digital Magnetic Hall Effect Sensor, providing a simple interface with a 3-pin header and JST-PH connector.

Adafruit · N/A

A breakout board for the RDA5807 FM radio chip, supporting I2C communication with Arduino and CircuitPython.

Adafruit

This is a breakout board for the SEN5x sensors, featuring power and I2C pins.

Adafruit · N/A

The Sen6X Breakout is an adapter for integrating Sensirion SEN6x environmental sensors into microcontroller or computer projects without soldering.

Adafruit · N/A

A breakout board for the Sensirion SHTC3 sensor, providing I2C and power connections.

Adafruit · Circuit Playground Express

A microcontroller board with built-in sensors for use in Microsoft MakeCode.

Adafruit · ATMega32U4

A small microcontroller board for debugging sensors using software serial.

Adafruit · ESP32-S2

A direct servo motor controller with rotary encoder input, saved positions, and animation features.

Adafruit · N/A

The Adafruit SGP40 is an air quality sensor that measures VOCs and H2, using I2C interface. It comes with a custom PCB in STEMMA QT form factor for easy connection to development boards.

Adafruit · N/A

The SGP41 is a multi-pixel gas sensor with I2C interface, designed for indoor air quality monitoring. It measures VOCs and NOx using two MOX hot-plate elements.

Adafruit · Raspberry Pi

The image shows a breadboard setup for connecting a Sharp Memory Display to a Raspberry Pi. The display is connected via GPIO pins, with specific connections as indicated in the diagram.

Adafruit · ATmega328

A shield designed for Arduino boards, featuring a microSD card slot and a joystick with a plastic knob.

Adafruit · N/A

A breakout board for the SHT31-D temperature and humidity sensor, featuring I2C connectivity with default address 0x44 or 0x45.

Adafruit · ATSAMD21 Microcontroller

The SHT4x Trinkey is a compact development board for measuring temperature and humidity with minimal setup.

Adafruit · Arduino

A UV index sensor with I2C interface, capable of measuring visible and IR light. Also includes basic proximity sensing.